coal tar enamel

COAL TAR ENAMEL

PRODUCT PROFILE

Known as hot applied Coal Tar Enamel & Marketed as per conforming to BS-4164/02 & AWWA-C-203/07 & IS 10221/82 or any such International standard and as per customer's specification.

Use : For protection of underground & aboveground gas, Oil & Water pipelines from corrosion particularly cross country pipelines.

Packing: Light weight M.S. Drums of 50 Kg., 200 - 250 Kg. and bricks/cake form.

syenthetic primer type - B

SYNTHETIC PRIMER TYPE B

PRODUCT PROFILE

Fast drying Chlorinated Rubber based synthetic Primer having Compatibility with hot applied Coal Tar Enamel conforming to BS4164/02 &AWWA- C203/07.

Use : For Priming of underground & aboveground Gas, oil & water pipeline to provide effective bond between Metal pipeline & Subsequent hot applied coal Tar Enamel.

Packing : 20 Liter and 200 Liter M.S. Drums.

coal tar primer type - a

COAL TAR PRIMER TYPE A

PRODUCT PROFILE

Slow drying Coal Tar based primer, preparation having compatibility with hot applied Coal Tar Enamel, Conforming to AWWA- C203 and IS 10221/82.

Use : For priming of underground & aboveground Gas, Oil & Water Pipelines to provide effective bond between metal pipe with subsequent hot applied coal Tar enamel.

Packing : 20 Liter and 200 Liter M.S. Drums.

coal tar primer Type- C

COAL TAR PRIMER TYPE ā€œCā€

PRODUCT PROFILE

Two Component heat curable liquid epoxy primer. This primer Uses latent heat of the hot enamel / Hot applied Tape to give bonding between Metal & Coal Tar Enamel or Tape conf. AWVVAC ā€” 203.

USE:- for Underground or above ground Oil / Water Pipelines protection & provide effective bond between Tape & Metal Pipelines.

Packing : 20 Ltrs.

coal tar outer wrap

COAL TAR IMPREGNATED OUTER WRAP

PRODUCT PROFILE

Non woven glass fiber mat impregnated with modified and plasticized Coal Tar or Bitumen as per AWWA C-203/07 and IS : 10221-1982 Outer wrap is dusted with fillers to prevent the layers from sticking together in the roll form.

Use : Provides mechanical strength to C.T. Enamel coatings for Pipeline Protection.

Packing: 150 mm to 500 mm width X 200 Mtr. length packed in corrugated boxes & wooden cases.

porwal coal tar tape

PORWAL'S COAL TAR TAPE

PRODUCT PROFILE

Coal Tar based hot applied anti corrosive tape wrap. High tensile strength fiber glass fabric impregnated and dipped in coal tar enamel and saturated as per AWWA C-203/07, IS 1537-03/IS 10221-07.

Use : For protection of underground & above ground gas, Oil & Water pipelines.

Packing : 250/333/500/1000 mm width and standard length of 10/15/20 Mtr. and also supplied according to pipe dia. Thickness 1.5/2.0/2.5/3.0/4.0 mm.

tape primer

TAPE PRIMER

PRODUCT PROFILE

Tape Primer Type "B" Conf. IS 15337 &AWWAC-203

Slow drying Rubber base Coal Tar Primer having compatibility with hot torched Coal Tar Tape conf. to AWVVAC-203, IS-15337 - 03 & IS -10221-07.

Use : For Underground or above ground Oil/Water Pipeline protection & provide effective bond between Tape & Metal Pipelines.

Packing : 20 liters & 200 liters.

base primer

BASE PRIMER

PRODUCT PROFILE

Cold applied anticorrosive paint resistant to acids & alkalies. Base primer prior to application of tape primer on blasted M.S. surface.

Use : For protection of Iron and Steel structures, Pipes and other construction above or below water.

Packing : 25 Ltr. Tin, 20 Ltrs. & 200 Ltrs. M.S. drums.